Precise control by joystick or hand-held transmitter
Precise control by joystick or hand-held transmitter
DRC-MP radio control system
DRC-MP radio control system
Convenient, safe and reliable control
The versatile alternative to wire-connected controls. DRC-MP radio controls are used for reliably controlling cranes, hoists, industrial doors, machinery and installations. You can choose between the DRC-10 key-actuated transmitter and the DRC-J joystick transmitter. Further benefits?
- High level of safety thanks to greater distance to the load
- Highly reliable data transmission thanks to frequency hopping
- Rugged housing
- Ergonomic design
- Fast and simple commissioning
Your Contact
Konecranes (Singapore) Pte Ltd
Konecranes (Singapore) Pte Ltd
33 Gul Circle, Singapore 629570
Service Hotline : +65 6862 1123
WhatsApp : +65 9430 8365
Phone:
+65 6305 3500
Fax:
+65 6862 1933
Product information
The benefits at a glance
Convenient operation
- Simple and fast commissioning by means of wireless transmitter log-on
- Bi-directional signal transmission
- Graphic display showing battery capacity and installation status or warning messages
- Stop function according to EN 954-1, category 3 PL "d"
- Convenient operation for smooth and precise travel
- High availability ensured by high-speed charging of the transmitter battery in 2 hours
- Emergency operation also possible with conventional Mignon AA type batteries (key-actuated transmitter)
High operating reliability
- Impact and temperature-resistant housing design
- Integrated impact protection on DRC-10 hand-held transmitter
Individual configuration
- Also available as a complete set for existing universal cranes
- Comprehensive accessories available for improved protection against chemicals and abrasive materials
- Postal authority approval for operation without any need for registration or operating fees in many countries
Technical data
DRC-10 pushbutton transmitter
- 6 infinitely variable pushbuttons (for infinitely variable or max. 2-stage control of up to three axes)
- Horn/limit switch test button
- Stop button
- 2 pushbuttons for special functions
- Weight incl. rechargeable battery: 500 g
- IP 55 enclosure
- Temperature range -20 to +50 °C
DRC-J joystick transmitter
- 1 joystick for lifting/lowering axis
- 1 joystick for two axes (cross and long travel)
- 1 horn/start button
- 1 limit switch test button
- 2 pushbuttons for special functions
- Mechanical key-operated switch to turn the transmitter on and off
- Weight incl. rechargeable battery: 1,800 g
- IP 55 enclosure
- Temperature range -20 to +70 °C
DRC-MP receiver
- Supply voltage 42–240 V AC, +/- 10%, 50–60 Hz
- Output relay for 250 V, 8 A, AC11 PWM outputs
- 3 digital feedback channels
- Power consumption 12 VA
- IP 65 enclosure
- Temperature range -20 to +70 °C
- Dimensions: W x H x D: 256 x 183 x 104 mm
