Low deadweight, easy to position

Slewing range 270°/300°

KBK pillar-mounted slewing jibs

Pillar-mounted slewing jibs with jibs made of profile sections from the KBK light crane system feature high load capacities and a long outreach in relation to their deadweight. The low weight enables the jib to be moved easily and the use of KBK hollow section rail as the crane girder requires very low force to travel.

D-AS 270 pillar-mounted slewing jibs

The light-weight design and low-headroom jib make this pillar-mounted slewing jib suitable for universal applications in the medium load range up to 2,000 kg.

Low-headroom KBK pillar-mounted slewing jibs

The low-headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernisation measures or changes in the use of the building, our pillar-mounted slewing jibs with short jib sections are the perfect solution in many cases.

KBK pillar-mounted slewing cranes with two jibs

Effective solution as a pillar-mounted slewing crane with two jibs for the same space requirement as slewing cranes with one jib. Four different jib arrangements are available for the perfect workplace design. The efficiency of specific process sequences can be further improved.

Slewing range n x 360°

Pillar-mounted slewing cranes offer a significant advantage wherever movement of the jib is not inhibited by walls, columns or similar obstacles The slewing range covers n x 360°.

D-GS 360 pillar-mounted slewing cranes

D-GS pillar-mounted slewing cranes for loads weighing up to 1,000 kg feature particularly low headroom and compact dimensions. They are the ideal solution wherever maximum hook paths are required for applications with low ceiling dimensions.

D-TS 360 pillar-mounted slewing cranes

These slewing cranes are the universal solution for the medium load range up to 5,000 kg. The low-headroom jib provides for particularly long hook paths. The cranes can also be powered by an optional electric slewing drive for ease of operation.

D-MS 360 pillar-mounted slewing cranes

These pillar-mounted slewing cranes feature a high load capacity for a long outreach. The low-headroom jib also offers long hook paths. Depending on requirements, D-MS cranes can be equipped with a DC chain hoist. They can also be powered by an optional electric slewing drive for ease of operation.

Slewing range 180°/360°

KBK wall-mounted slewing jibs

A decisive advantage of wall-mounted slewing jibs is that they require no floor space, since they are mounted on load-bearing concrete walls, pillars or machinery and installations. They are particularly easy to install, since the bracket is ready to be fitted as a unit and eliminates any complicated alignment work. KBK wall-mounted slewing jibs are suitable for the lower load range up to 1000 kg.

Low-headroom KBK wall-mounted slewing jibs

The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernisation measures or changes in the use of the building, our "short" units are the perfect solution in many cases.

D-AW wall-mounted slewing jibs

D-AW wall-mounted slewing jibs are suitable for universal applications in the lower load range up to 2,000 kg. The low deadweight makes it easy to move the jib even under loaded condition. Thanks to their low headroom dimension, they can also be used wherever long hook paths are needed in spite of a low ceiling height.

D-GW wall-mounted slewing jib

Designed for use with Demag chain hoists or Demag rope hoists in connection with their low-headroom jib and high load capacity, D-GW wall-mounted slewing jibs are suitable for a wide variety of applications.